Account
My Items
OR
N 6796 is a bi-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are...
N 6796 is a bi-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. If a shim is needed see N 6795 carpet riser to accommodate the height of the carpet.Unit: EA
N 6817 is an adjustable mirrored door 1-1/2 in concave or grooved nylon roller used on Cox Series 21 and 22 Door Systems. The unique design has bottom feet or brackets that fit under the door frame...
N 6817 is an adjustable mirrored door 1-1/2 in concave or grooved nylon roller used on Cox Series 21 and 22 Door Systems. The unique design has bottom feet or brackets that fit under the door frame and fastened into place there and up the side. The 1-1/2 in nylon roller provides a smooth ride for heavy mirrored doors.Unit: CD
N 6820 has an adjustable steel housing with a 1-7/16 in ball bearing roller installed. Used on charmed mirrored doors in the late 90's, the original designed housing is no longer available. In some...
N 6820 has an adjustable steel housing with a 1-7/16 in ball bearing roller installed. Used on charmed mirrored doors in the late 90's, the original designed housing is no longer available. In some cases, to make this part work the lower tabs may need to be trimmed off. Never remove the upper tabs nearest the adjusting screw. The housing upper tab snaps into a slot on the inside of the door frame, while the door rests on the bottom tabs that extend out from the base of the housing.Unit: EA ...
N 6823 is a stamped steel top pivot bracket. It fits into the Acme 5/8 in wide track. The bracket is inserted into the track and as the screw is tightened, it forces the bracket against the lip...
N 6823 is a stamped steel top pivot bracket. It fits into the Acme 5/8 in wide track. The bracket is inserted into the track and as the screw is tightened, it forces the bracket against the lip running the length of both sides of the track. It is adjustable by moving it back or forth to the best position. It is used with the Acme top pivot N 6672.Unit: CD
N 6830 is an adjustable, side mounted, top hung closet door roller assembly with a 7/16 in offset and a 15/16 in convex nylon roller used on Excellent brand closet doors. It fits 3/4 in to 1-3/8 in...
N 6830 is an adjustable, side mounted, top hung closet door roller assembly with a 7/16 in offset and a 15/16 in convex nylon roller used on Excellent brand closet doors. It fits 3/4 in to 1-3/8 in thick doors. Originally used by Excellent Door.Unit: CD
N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors.Unit: CD 2 ...
N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors.Unit: CD 2
N 6841 is an adjustable top hung, side mounted bracket with a 3/8 in offset and 7/8 in flat nylon roller used on the back sliding door panel. It fits 3/4 to 1-3/8 in thick doors.Unit: CD 2
Plated steel, universal design fits a 3/4 in Dia hole.Unit: CD 4
N 6848 is a top, center mounted, adjustable, tricycle style roller assembly. The three 1 in flat durable nylon rollers provide a smooth, long-lasting quiet operation. They are attached to a stamped...
N 6848 is a top, center mounted, adjustable, tricycle style roller assembly. The three 1 in flat durable nylon rollers provide a smooth, long-lasting quiet operation. They are attached to a stamped steel & nylon carriage mounted on top of a threaded steel rod. The threaded rod catches into a bracket that locks it in place. Used on Johnson Bi-pass & Pocket Closet Doors.Unit: PK 2
Plated steel, includes two brass nails for installation.Unit: PK 2
N 6870 is a paneled mirror door roller assembly with a concave nylon roller. Used on contractor's mirror doors, the grooved nylon roller rides on a track. The concave nylon roller is 1-1/2 in Dia....
N 6870 is a paneled mirror door roller assembly with a concave nylon roller. Used on contractor's mirror doors, the grooved nylon roller rides on a track. The concave nylon roller is 1-1/2 in Dia. Note that the adjusting screw is centered on the top of the housing and the tabs on either side will insert into slots on that side and will be held in place by the existing screws.Unit: EA