Window & Door Hardware

N 6655 is a set of steel floor guides with a nylon tip. Used in the past on Like Doors, it provides an alternative when the door thickness is larger than the ordinary or a heavy-duty floor guide is...

N 6655 is a set of steel floor guides with a nylon tip. Used in the past on Like Doors, it provides an alternative when the door thickness is larger than the ordinary or a heavy-duty floor guide is needed. The steel floor brackets are covered with a nylon tip that protects the doors as they pass through them.Unit: CD

N 6656 is a set of brass-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the...

N 6656 is a set of brass-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the non-mortise installed.Unit: CD 2

N 6658 is 7/8 in Dia anti-slam bumper that is installed onto the jamb with a screw. The bumper stands out 7/16 in from the surface it has been mounted to. It provides a protective anti-slam stop...

N 6658 is 7/8 in Dia anti-slam bumper that is installed onto the jamb with a screw. The bumper stands out 7/16 in from the surface it has been mounted to. It provides a protective anti-slam stop when closing bi-pass wardrobe doors.Unit: EA

N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates...

N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.Unit: CD

N 6667 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and...

N 6667 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and has a 1/4 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems.Unit: CD

N 6668 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has...

N 6668 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has a 1/2 in offset. It fits 3/4 to 1-3/8 in thick doors. Used on Atlas closet door systems. For front door panel see N 6667.Unit: CD

N 6672 is a nylon top mount bi-fold door pivot. Used by several manufacturers, the spring-loaded 3/8 in nylon pin inserts into the top pivot bracket above creating a pivot point for the bi-fold...

N 6672 is a nylon top mount bi-fold door pivot. Used by several manufacturers, the spring-loaded 3/8 in nylon pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.Unit: CD 4

N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.Unit: CD 2

N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.Unit: CD 2

N 6686 is a 1-3/16 in concave steel ball bearing roller assembly that installs into a 1/2 in deep by 2-15/16 in long mortised pocket on each end of the solid wood closet door bottom rail. The roller...

N 6686 is a 1-3/16 in concave steel ball bearing roller assembly that installs into a 1/2 in deep by 2-15/16 in long mortised pocket on each end of the solid wood closet door bottom rail. The roller assembly is held in place by two 3/4 in long screws. The bracket is stamped steel with a 1-3/16 in steel grooved ball bearing roller installed. Rides on a metal track installed onto the floor. Used by several manufacturers of solid wood closet doors.Unit: EA

N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.Unit: CD 2

N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.Unit: CD 2

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.Unit: CD 2

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.Unit: CD 2

Plated steel, includes two brass nails for installation.Unit: CD 2

Plated steel, includes two brass nails for installation.Unit: CD 2