Window & Door Hardware

The H 3542 is a right handed casement locking handle in an aluminum finish with 2-3/8 in mounting holes. The handle is die-cast construction with the handle sweeping slightly to the left. This...

The H 3542 is a right handed casement locking handle in an aluminum finish with 2-3/8 in mounting holes. The handle is die-cast construction with the handle sweeping slightly to the left. This allows a more comfortable grip to open to the left when there are dual casement windows with a center rail dividing them.Unit: EA

H 3546 is a universal louver operator in aluminum finished die-cast construction. The mounting holes are 4-3/4 or 3-7/8 in apart. It is a reversible non-handed design that can be used on either left...

H 3546 is a universal louver operator in aluminum finished die-cast construction. The mounting holes are 4-3/4 or 3-7/8 in apart. It is a reversible non-handed design that can be used on either left or right handed installations. The universal link arm comes with break-off points with holes every 1/2 in providing a link arm 1-13/16 to 5-5/16 in long to accommodate the needs of installation. It comes with a matching tee handle that fits the 5/16 in spindle.Unit: CD

The H 3553 is an older style of casement lock-plated brass on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it...

The H 3553 is an older style of casement lock-plated brass on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being used on casement windows, it is often used on cupboards and cabinets for that retro look.Unit: CD

The H 3598 is a left handed die-cast casement locking handle with an offset base found on many contemporary casement windows. The mounting holes are positioned offset of the centerline down the base...

The H 3598 is a left handed die-cast casement locking handle with an offset base found on many contemporary casement windows. The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge or to be more exact, 13/16 in from the tip of the lock to the center of the mounting holes. This handle has an bronze finish with mounting holes for the handle assembly and the keeper at 1-1/2 in apart.Unit: CD

H 3667 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Air Control-Keller windows. It is left handed with a matching crank handle with a 2-3/8 in link...

H 3667 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Air Control-Keller windows. It is left handed with a matching crank handle with a 2-3/8 in link arm. It has an L shaped mounting hole pattern that is 5-1/4 in from center of the top hole to the center of the bottom hole and the 2 horizontal holes in the bottom leg are 1-1/8 in apart.Unit: EA

H 3668 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Air Control-Keller windows. It is right handed with a matching crank handle with a 2-3/8 in...

H 3668 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Air Control-Keller windows. It is right handed with a matching crank handle with a 2-3/8 in link arm. It has an L shaped mounting hole pattern that is 5-1/4 in from center of the top hole to the center of the bottom hole and the 2 horizontal holes in the bottom leg are 1-1/8 in apart.Unit: CD

H 3670 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Pan-American windows. It is right handed with a matching crank handle with a 2-5/8 in link arm....

H 3670 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Pan-American windows. It is right handed with a matching crank handle with a 2-5/8 in link arm. It has an L shaped mounting hole pattern that has 2 top holes that are 5-1/4 in from center of the top holes to the center of the bottom hole and the 2 horizontal holes in the bottom leg are 1-5/16 in apart.Unit: CD

H 3672 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Stanley-C and E windows. It is right handed with a matching crank handle with a 2-3/16 in link...

H 3672 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Stanley-C and E windows. It is right handed with a matching crank handle with a 2-3/16 in link arm. It has an L shaped mounting hole pattern that is 5-1/4 in from center of the top hole to the center of the bottom hole and the 2 horizontal holes in the bottom leg are 1-3/8 in apart.Unit: CD

The H 3683 is an older style of casement lock-plated antique brass on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications...

The H 3683 is an older style of casement lock-plated antique brass on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being used on casement windows, it is often used on cupboards and cabinets for that retro look.Unit: EA

The H 3684 is an older style of casement lock-plated chrome on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether...

The H 3684 is an older style of casement lock-plated chrome on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being used on casement windows, it is often used on cupboards and cabinets for that retro look.Unit: EA

The H 3685 awning crank handle is aluminum die-cast and has a 3/8 in bore spindle. This fits most awning operators with a 3/8 in bore spindle such as the universal H 3554 or H 3555. It offers...

The H 3685 awning crank handle is aluminum die-cast and has a 3/8 in bore spindle. This fits most awning operators with a 3/8 in bore spindle such as the universal H 3554 or H 3555. It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 3-1/2 in.Unit: CD

The H 3686 casement crank handle is bronze die-cast and has a 11/32 in bore spindle. This fits most operators with a 11/32 in bore spindle such as H 3568 through H 3571. It offers excellent torque...

The H 3686 casement crank handle is bronze die-cast and has a 11/32 in bore spindle. This fits most operators with a 11/32 in bore spindle such as H 3568 through H 3571. It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 3 in.Unit: CD