SENCO PRODUCTS

Senco Nail, Collation Type: Wire Weld Coil, Collation Angle: 15 deg, Head Diameter: 0.113 in, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 2-3/8 in L, Gray, Steel, Sencote, Suitable...

Senco Nail, Collation Type: Wire Weld Coil, Collation Angle: 15 deg, Head Diameter: 0.113 in, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 2-3/8 in L, Gray, Steel, Sencote, Suitable for: PAL100XP, SFN40, SFN2B Pneumatic NailerUnit: BX6M

Extra power for use in hard woods. Durable hardened alloy steel driver with rear exhaust, smooth metal cap and automatically adjusts for different fastener lengths. Easy-open latch for quick and...

Extra power for use in hard woods. Durable hardened alloy steel driver with rear exhaust, smooth metal cap and automatically adjusts for different fastener lengths. Easy-open latch for quick and comfortable loading, soft grip handle plus low load alert. Specs: Height: 6-3/4"; Length: 7.87"; Weight: 2.5 lb.; Reg. Operating Pressure: 70-110 psi; Mode of Operation: Sequential Actuation, Magazine Capacity: 126 pins. Fastener Specifications; Gauge: 23; Minimum Length: 1/2", Maximum Length: 1-3/8";...

Senco Finish Nail, Collation Type: Glue, Collation Angle: 34 deg, Head Diameter: 0.072 in, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 2 in L, Steel, Bright Basic,...

Senco Finish Nail, Collation Type: Glue, Collation Angle: 34 deg, Head Diameter: 0.072 in, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 2 in L, Steel, Bright Basic, Suitable for: SFN40, SFN30, SFN1+, F15, FinishPro 35, FinishPro 41XP NailersUnit: BX4M

Sencote coating, ProHead offset, diamond point.Unit: BX25C

Sencote coating, ProHead offset, diamond point.Unit: BX25C

2 drive bits per pack for use with Duraspin technology integrated auto-feed screw systems. Compatible with Duraspin models and fits DS312-18V and DS332-AC.Unit: CD

2 drive bits per pack for use with Duraspin technology integrated auto-feed screw systems. Compatible with Duraspin models and fits DS312-18V and DS332-AC.Unit: CD

Senco Finish Nail, Collation Type: Glue, Collation Angle: 34 deg, Head Diameter: 0.072 in, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 1-1/2 in L, Galvanized Steel,...

Senco Finish Nail, Collation Type: Glue, Collation Angle: 34 deg, Head Diameter: 0.072 in, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 1-1/2 in L, Galvanized Steel, Suitable for: SFN40, SFN30, SFN1+, F15, FinishPro 35, FinishPro 41XP NailersUnit: BX4M

Senco Collated Nail, Collation Type: Paper Tape, Collation Angle: 34 deg, Head Type: Clipped, Point Type: Diamond, Shank Type: Smooth, 0.12 in Dia, 3 in L, Steel, Bright Basic, Suitable for: Model...

Senco Collated Nail, Collation Type: Paper Tape, Collation Angle: 34 deg, Head Type: Clipped, Point Type: Diamond, Shank Type: Smooth, 0.12 in Dia, 3 in L, Steel, Bright Basic, Suitable for: Model SFN40, SFN2B Pneumatic NailerUnit: BX25C

High torque motor for heavy-duty applications, jobsite portability, fully integrated (no attachments) design for better balance, smoother operation, and less user fatigue, no more stripped out heads...

High torque motor for heavy-duty applications, jobsite portability, fully integrated (no attachments) design for better balance, smoother operation, and less user fatigue, no more stripped out heads and improved bit life, adjustable depth-of-drive. Specs: 2500RPM, weighs 6.0lbs. Includes: (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag, (1) square bit and (1) Phillips bit.Unit: EA

For Insulation, vapor barriers and felt roofing. Drives 20 ga staples with 7/16 crown and 3/8 length.Unit: EA

For Insulation, vapor barriers and felt roofing. Drives 20 ga staples with 7/16 crown and 3/8 length.Unit: EA

Senco Nail, Collation Type: Angled Coil Wire, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 0.092 in Dia, 2 in L, 304 Stainless Steel, SencoteUnit: EA ...

Senco Nail, Collation Type: Angled Coil Wire, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 0.092 in Dia, 2 in L, 304 Stainless Steel, SencoteUnit: EA

Fasteners for ACQ pressure treated lumber. Fits Senco PW200, PW150, PW150R, PW, PW-2 in, PW-R, SPS, MW, Duofast RS-1748, KW-1748, Hitachi N3824A, Fasco F3 SNW-38CT R, F30 SNW-50 R and Halstead...

Fasteners for ACQ pressure treated lumber. Fits Senco PW200, PW150, PW150R, PW, PW-2 in, PW-R, SPS, MW, Duofast RS-1748, KW-1748, Hitachi N3824A, Fasco F3 SNW-38CT R, F30 SNW-50 R and Halstead HSW14.Unit: BX10M

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1,...

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1, DeWALT D51430, Max TA551, Hitachi N500AC, 5008AA/AB, Porter Cable MS200, Others Atro Panta 100, DuoFast DS-7664, Fasco F4P-G-50, Spotnails XS6650.Unit: BX5M

50 screws per flat strip. Thread, coarse 2/3 with wax, yellow zinc finish. Compatible with DS440AC (557.4876), DS425AC (557.4827), DS332AC (264.0720), DS232AC (264.0670), DS31218V (305.6512).Unit:...

50 screws per flat strip. Thread, coarse 2/3 with wax, yellow zinc finish. Compatible with DS440AC (557.4876), DS425AC (557.4827), DS332AC (264.0720), DS232AC (264.0670), DS31218V (305.6512).Unit: PAIL

Sencote coating, ProHead offset, diamond point.Unit: EA

Sencote coating, ProHead offset, diamond point.Unit: EA

The JoistPro250MXP is a metal connector nailer that can drive up to 2-1/2 in nails for applications where code requires a longer nail. The tool is fitted with a longer magazine that holds two racks...

The JoistPro250MXP is a metal connector nailer that can drive up to 2-1/2 in nails for applications where code requires a longer nail. The tool is fitted with a longer magazine that holds two racks of nails for less downtime and higher production rates. Its innovative nosepiece design provides accurate nail placement into pre-punched metal connector holes. It's also extremely durable and easy-to-use. Unit: EA

Senco Nail, Collation Type: Angled Coil Wire, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 0.092 in Dia, 2-1/4 in L, 304 Stainless Steel, SencoteUnit: EA ...

Senco Nail, Collation Type: Angled Coil Wire, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 0.092 in Dia, 2-1/4 in L, 304 Stainless Steel, SencoteUnit: EA

Applications: Moldings, picture frame assembly, trim and cabinetry building.Unit: BX700

Applications: Moldings, picture frame assembly, trim and cabinetry building.Unit: BX700

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1,...

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1, DeWALT D51430, Max TA551, Hitachi N500AC, 5008AA/AB, Porter Cable MS200, Others Atro Panta 100, DuoFast DS-7664, Fasco F4P-G-50, Spotnails XS6650.Unit: BX5M

Senco Finish Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 0.063 in, Head Type: T-Shaped, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 16, 1-1/2 in L, Galvanized...

Senco Finish Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 0.063 in, Head Type: T-Shaped, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 16, 1-1/2 in L, Galvanized Steel, Suitable for: RoofPro450/455XP, FinishPro 32, F-16S NailersUnit: BX

The Senco PC1195 mini pneumatic hand nailer drives bulk nails up to 3 1/2 in applications to tight to swing a hammer.Unit: EA

The Senco PC1195 mini pneumatic hand nailer drives bulk nails up to 3 1/2 in applications to tight to swing a hammer.Unit: EA

Senco Replacement Power Bit, Drive Type: Square, Shank Type: Hex, Shank Size: 1/4 in, Steel, Uncoated, 9 in L, Suitable for: DS440-AC Auto-Feed ScrewdriversUnit: CD 2

Senco Replacement Power Bit, Drive Type: Square, Shank Type: Hex, Shank Size: 1/4 in, Steel, Uncoated, 9 in L, Suitable for: DS440-AC Auto-Feed ScrewdriversUnit: CD 2

Specially designed cup head screws eliminate mushrooming around the screw head after installation.Unit: EA

Specially designed cup head screws eliminate mushrooming around the screw head after installation.Unit: EA

Information on nail compatibility is available online at www.senco.com.Unit: BX

Information on nail compatibility is available online at www.senco.com.Unit: BX

Sencote coating, ProHead offset, diamond point.Unit: BX25C

Sencote coating, ProHead offset, diamond point.Unit: BX25C