MALCO PRODUCTS

Using the facing gauge while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging. The FCFG facing gauge may also be used in combination...

Using the facing gauge while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging. The FCFG facing gauge may also be used in combination with the Malco FCG2 overlap gauge to prop up one end of the plank for one-person application.Unit: EA

Strong, one-piece tempered spring steel construction with precision-ground tip assures gauge will grip behind siding plank. No adjustments to vary and nothing to mark. Will not mar finish of...

Strong, one-piece tempered spring steel construction with precision-ground tip assures gauge will grip behind siding plank. No adjustments to vary and nothing to mark. Will not mar finish of pre-painted siding. Works with 5/16 in (7.9 mm) fiber cement siding. Permits one person application of panels. Two gauges support entire length of panel and precisely gauge a standard 1-1/4 in (31.2 mm) overlap.Unit: EA

The time-saving TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. It's that easy to convert your power drill to a power shear. This rugged but...

The time-saving TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. It's that easy to convert your power drill to a power shear. This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20 ga (1.02 mm) galvanized steel. Blind cuts require only a 1/2 in (12.7 mm) starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal...

Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile model TSMD TurboShear drill attachment fits a corded or cordless drill...

Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile model TSMD TurboShear drill attachment fits a corded or cordless drill you already own. The blades of the Malco Double-Cut TurboShears remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut. These blades can approach a cut from either end to produce a quality work-piece edge. They can also navigate up to 90 deg...

Replacement blades and rivets; pressure fit inset blades make field replacement easy.Unit: PR

Replacement blades and rivets; pressure fit inset blades make field replacement easy.Unit: PR

Make fast, accurate cuts in fiber cement siding anywhere on the job with a versatile and powerful TurboShear Drill Attachment. Malco's one-hand operation fiber cement shears quickly insert into the...

Make fast, accurate cuts in fiber cement siding anywhere on the job with a versatile and powerful TurboShear Drill Attachment. Malco's one-hand operation fiber cement shears quickly insert into the chuck of a corded or cordless electric drill or impact driver. Smooth, easy one-hand operation always leaves a free hand to steady the work when making cuts on a bench or scaffolding. A wide skid-plate on the head design stabilizes cutting action for extra-smooth results in 5/16 in (7.9 mm) fiber...

Malco's TSCM TurboShears work better and faster than manual metal roofing shears. This versatile and portable TurboShear fits a drill you already own to make easy cross cuts, fast lengthwise cuts...

Malco's TSCM TurboShears work better and faster than manual metal roofing shears. This versatile and portable TurboShear fits a drill you already own to make easy cross cuts, fast lengthwise cuts and precise circular and square outlet cuts in large or small pattern corrugated metal roofing and common trapezoidal (box) pattern metal roofing panels. Elongated blades with compact jaws create a steep 75 deg offset so that the drill is held at a nearly vertical approach when starting a cut. As...

Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when...

Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4 in (31.2 mm) standard trim nails.Unit: CD

The Malco TurboShear Heavy Duty (TSHD) is a powerful drill attachment for cutting sheet metal that quickly inserts into the chuck of a corded or cordless drill. This electric shear attachment has...

The Malco TurboShear Heavy Duty (TSHD) is a powerful drill attachment for cutting sheet metal that quickly inserts into the chuck of a corded or cordless drill. This electric shear attachment has the capability to make fast straight, curved or square cuts in most common sheet metals. The shear's wide-opening jaws can operate at high or low speeds for the control you need. The heavy-duty gearing and beefy, hardened carbon steel blades of the tool combine to offer up to 18 ga (1.22 mm) cutting...

Distinctive gold bits, bearings and pivot pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Malco hole cutters quickly install into the...

Distinctive gold bits, bearings and pivot pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Malco hole cutters quickly install into the chuck of any corded or cordless drill as small as 1/4 in (6.35 mm). Lightweight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20 ga (1.02 mm) galvanized steel. A compact model HC1 hole cutter is adjustable for making 2 to...

Mill type cutter bit for HC1 (373.8515) and HC2.Unit: EA

Mill type cutter bit for HC1 (373.8515) and HC2.Unit: EA

With an overall length of only 7-1/8 in, the AVS Mini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 in length of cut provides the optimum speed...

With an overall length of only 7-1/8 in, the AVS Mini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 in length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels. Each snip is made with forged steel jaws that contain precision-ground serrations on the lower blade, which produces a sharply defined edge for cutting accuracy and control. The AVS Mini left cutting offset design provides...

With an overall length of only 7-1/8 in, the AVS Mini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 in length of cut provides the optimum speed...

With an overall length of only 7-1/8 in, the AVS Mini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 in length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels. Each snip is made with forged steel jaws that contain precision-ground serrations on the lower blade, which produces a sharply defined edge for cutting accuracy and control. The right cutting offset design provides...

A superior compound leverage mechanism offers maximum ease of operation. Comfortable opening, spring-actuated handles, give additional comfort and control. Ergonomic REDLINE Handles with unique...

A superior compound leverage mechanism offers maximum ease of operation. Comfortable opening, spring-actuated handles, give additional comfort and control. Ergonomic REDLINE Handles with unique one-hand operation latch offer maximum compound leverage performance and natural fit and feel.Unit: EA

Cut through heavy vinyl siding lock seams and more with ease. The MV12 aluminum handled snip is part of the legendary Andy Snip line of "lightweight snips with the strength of steel". This unique...

Cut through heavy vinyl siding lock seams and more with ease. The MV12 aluminum handled snip is part of the legendary Andy Snip line of "lightweight snips with the strength of steel". This unique Andy combination snip design features a knife-like cutting edge to produce a smooth slicing action for easy one-hand operation. The user simply grasps the snip with the red grip up for optimal blade alignment when making straight cuts or left or right circular cuts in a variety of non-ferrous...

18F folding tools offer a sturdy solution for folding sheet metal. Each model is made with excellent design and include handy sight holes to assure proper depth alignment.Unit: EA

18F folding tools offer a sturdy solution for folding sheet metal. Each model is made with excellent design and include handy sight holes to assure proper depth alignment.Unit: EA

Replacement blades and rivets; pressure fit inset blades make field replacement easy.Unit: PR

Replacement blades and rivets; pressure fit inset blades make field replacement easy.Unit: PR

If you are looking for a tool that efficiently downsizes the corners of aluminum or steel downspout, then the Malco 5 blade gutter crimper is the tool you are looking for. The blades produce 1-1/4...

If you are looking for a tool that efficiently downsizes the corners of aluminum or steel downspout, then the Malco 5 blade gutter crimper is the tool you are looking for. The blades produce 1-1/4 in long double crimps without causing deformation of downspout walls. A factory-like crimp ensures that the downspout walls stay square for a tight fitting, leak-proof connection. A handle closing stop helps to maintain a consistent crimp profile. Made with hardened all-steel construction and a...

A unique heavy-duty cleanser that dissolves rust, mineral stains, hard water deposits and soap scum.Unit: EA

A unique heavy-duty cleanser that dissolves rust, mineral stains, hard water deposits and soap scum.Unit: EA

Add snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel. Used as a finishing course at top of wall or below window. Tabs lock into utility trim. Punch...

Add snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel. Used as a finishing course at top of wall or below window. Tabs lock into utility trim. Punch raises a high projection to compensate for natural relaxation of vinyl plastic. It also works well on aluminum siding but is not recommended for steel. Throat depth of 3/8 in and length of 9 in.Unit: EA

Sleek styling, easy blade replacement and larger handles make the Andy Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in vinyl siding, aluminum, copper or...

Sleek styling, easy blade replacement and larger handles make the Andy Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in vinyl siding, aluminum, copper or sheet metal. Snips are capable of cutting tight material shapes such as a J-Channel. A full 3 in cutting length makes straight shearing with the Malco Andy snip fast and easy. Blade replacement is easily accomplished in the field.Unit: EA

The Malco SideSwiper model SRT2, is a vinyl siding removal tool that combines the comfort and added leverage of an easy-to-grasp straight handle, with the smooth unlocking motion of a burr-free...

The Malco SideSwiper model SRT2, is a vinyl siding removal tool that combines the comfort and added leverage of an easy-to-grasp straight handle, with the smooth unlocking motion of a burr-free hook. The blade of the removal tool is angled from the bottom plane of the handle and allows the user to keep their wrist straight while keeping knuckles well above the work. The surface finishing and plating of the blade assures that the sharply angled hook will not cut into the vinyl material or...

Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when...

Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4 in (31.2 mm) standard trim nails.Unit: EA

Unique one-hand operation latch. soft-touch, non-slip handle insert. Ergonomically contoured handles. Opening maximizes handle leverage. Throat depth adjustments from 1/4 in to 5/8 in.Unit: EA ...

Unique one-hand operation latch. soft-touch, non-slip handle insert. Ergonomically contoured handles. Opening maximizes handle leverage. Throat depth adjustments from 1/4 in to 5/8 in.Unit: EA